Unified Laptop and Desktop

hosts/mac-laptop/configuration.nix

@@ -0,0 +1,215 @@
+# Edit this configuration file to define what should be installed on
+# your system.  Help is available in the configuration.nix(5) man page
+# and in the NixOS manual (accessible by running ‘nixos-help’).
+
+{ config, pkgs, inputs, ... }:
+
+{
+  imports =
+    [ # Include the results of the hardware scan.
+      ./hardware-configuration.nix
+    ];
+  powerManagement.enable = true;
+  hardware.asahi.peripheralFirmwareDirectory = ./firmware;
+  hardware.asahi.enable = true;
+  services.upower.enable = true;
+  
+
+  # Bootloader.
+  boot.loader.systemd-boot.enable = true;
+  boot.loader.efi.canTouchEfiVariables = false;
+  boot = {
+
+    plymouth = {
+      enable = true;
+      theme = "square_hud";
+      themePackages = with pkgs; [
+        # By default we would install all themes
+        (adi1090x-plymouth-themes.override {
+          selected_themes = [ "square_hud" ];
+        })
+      ];
+    };
+
+    # Enable "Silent Boot"
+    consoleLogLevel = 0;
+    initrd.verbose = false;
+    kernelParams = [
+      "quiet"
+      "splash"
+      "boot.shell_on_fail"
+      "loglevel=3"
+      "rd.systemd.show_status=false"
+      "rd.udev.log_level=3"
+      "udev.log_priority=3"
+    ];
+    # Hide the OS choice for bootloaders.
+    # It's still possible to open the bootloader list by pressing any key
+    # It will just not appear on screen unless a key is pressed
+    loader.timeout = 0;
+
+  };
+
+  networking.hostName = "nixos-laptop"; # Define your hostname.
+  # networking.wireless.enable = true;  # Enables wireless support via wpa_supplicant.
+
+  # Configure network proxy if necessary
+  # networking.proxy.default = "http://user:password@proxy:port/";
+  # networking.proxy.noProxy = "127.0.0.1,localhost,internal.domain";
+
+  # Enable networking
+  networking.networkmanager.enable = true;
+
+  # Set your time zone.
+  time.timeZone = "America/Chicago";
+
+  # Select internationalisation properties.
+  i18n.defaultLocale = "en_US.UTF-8";
+
+  i18n.extraLocaleSettings = {
+    LC_ADDRESS = "en_US.UTF-8";
+    LC_IDENTIFICATION = "en_US.UTF-8";
+    LC_MEASUREMENT = "en_US.UTF-8";
+    LC_MONETARY = "en_US.UTF-8";
+    LC_NAME = "en_US.UTF-8";
+    LC_NUMERIC = "en_US.UTF-8";
+    LC_PAPER = "en_US.UTF-8";
+    LC_TELEPHONE = "en_US.UTF-8";
+    LC_TIME = "en_US.UTF-8";
+  };
+
+  # Enable Cosmic
+  services.desktopManager.cosmic.enable = false;
+  services.displayManager.cosmic-greeter.enable = false;
+  services.xserver.desktopManager.gnome.enable = false;
+  services.desktopManager.plasma6.enable = false;
+  services.displayManager.sddm.enable = false;
+  services.libinput.enable = true;
+  programs.hyprland.enable = true;
+  environment.sessionVariables.NIXOS_OZONE_WL = "1";
+
+  services.greetd = {
+    enable = true;
+    settings = rec {
+    initial_session = {
+    command = "${pkgs.hyprland}/bin/Hyprland";
+      user = "joshuaelm";
+    };
+        default_session = initial_session;
+    };
+  };
+  	 
+
+  # Swap
+  swapDevices = [ {
+    device = "/var/lib/swapfile";
+    size = 16*1024;
+  } ];
+
+
+  hardware.graphics = {
+    enable = true;
+  };
+
+  hardware.asahi.useExperimentalGPUDriver = true;
+
+  # Configure keymap in X11
+  services.xserver.xkb = {
+    layout = "us";
+    variant = "";
+  };
+
+  # fingerprint
+  systemd.services.fprintd = {
+    wantedBy = [ "multi-user.target" ];
+    serviceConfig.Type = "simple";
+  };
+  services.fprintd.enable = true;
+
+  # Define a user account. Don't forget to set a password with ‘passwd’.
+  users.users.joshuaelm = {
+    isNormalUser = true;
+    description = "Joshua Elmasri";
+    extraGroups = [ "networkmanager" "wheel" "adbusers" "dialout" ];
+    packages = with pkgs; [];
+  };
+
+  programs.adb.enable = true;
+
+  # Allow unfree packages
+  nixpkgs.config.allowUnfree = true;
+
+  # List packages installed in system profile. To search, run:
+  # $ nix search wget
+  # Flatpak
+  #services.flatpak.enable = true;
+  #services.flatpak.update.onActivation = true;
+  #services.flatpak.packages = [
+ #   "app.bluebubbles.BlueBubbles"
+  #  "com.github.johnfactotum.Foliate"
+   # "org.jdownloader.JDownloader"
+  #];
+
+ # Fonts
+
+  fonts.packages = with pkgs; [
+  fira-code
+  fira-code-symbols
+  roboto
+  nerd-fonts.fira-code
+  nerd-fonts.jetbrains-mono
+  ];
+
+
+  programs.kdeconnect.enable = true;
+
+  environment.systemPackages = with pkgs; [
+  #  vim # Do not forget to add an editor to edit configuration.nix! The Nano editor is also installed by default.
+  #  wget
+  neovim
+  killall
+  hypridle
+  git
+  bibata-cursors
+  element-desktop
+  rofi-wayland
+  inputs.zen-browser.packages.${pkgs.system}.default
+  playerctl
+  cava
+  moonlight-qt
+  ];
+
+  # Bluetooth
+  hardware.bluetooth.enable = true;
+
+  # Some programs need SUID wrappers, can be configured further or are
+  # started in user sessions.
+  # programs.mtr.enable = true;
+  # programs.gnupg.agent = {
+  #   enable = true;
+  #   enableSSHSupport = true;
+  # };
+
+  # List services that you want to enable:
+
+  # Enable the OpenSSH daemon.
+  # services.openssh.enable = true;
+
+  # Enable Flakes
+  nix.settings.experimental-features = [ "nix-command" "flakes"  ];
+
+  # Open ports in the firewall.
+  # networking.firewall.allowedTCPPorts = [ ... ];
+  # networking.firewall.allowedUDPPorts = [ ... ];
+  # Or disable the firewall altogether.
+  # networking.firewall.enable = false;
+
+  # This value determines the NixOS release from which the default
+  # settings for stateful data, like file locations and database versions
+  # on your system were taken. It‘s perfectly fine and recommended to leave
+  # this value at the release version of the first install of this system.
+  # Before changing this value read the documentation for this option
+  # (e.g. man configuration.nix or on https://nixos.org/nixos/options.html).
+  system.stateVersion = "25.05"; # Did you read the comment?
+
+}

hosts/mac-laptop/hardware-configuration.nix

@@ -0,0 +1,37 @@
+# Do not modify this file!  It was generated by ‘nixos-generate-config’
+# and may be overwritten by future invocations.  Please make changes
+# to /etc/nixos/configuration.nix instead.
+{ config, lib, pkgs, modulesPath, ... }:
+
+{
+  imports =
+    [ (modulesPath + "/installer/scan/not-detected.nix")
+    ];
+
+  boot.initrd.availableKernelModules = [ "usb_storage" ];
+  boot.initrd.kernelModules = [ ];
+  boot.kernelModules = [ ];
+  boot.extraModulePackages = [ ];
+
+  fileSystems."/" =
+    { device = "/dev/disk/by-uuid/089c3a91-0f69-4a24-8ca0-e7a4a817be07";
+      fsType = "ext4";
+    };
+
+  fileSystems."/boot" =
+    { device = "/dev/disk/by-uuid/4267-12F5";
+      fsType = "vfat";
+      options = [ "fmask=0022" "dmask=0022" ];
+    };
+
+  swapDevices = [ ];
+
+  # Enables DHCP on each ethernet and wireless interface. In case of scripted networking
+  # (the default) this is the recommended approach. When using systemd-networkd it's
+  # still possible to use this option, but it's recommended to use it in conjunction
+  # with explicit per-interface declarations with `networking.interfaces.<interface>.useDHCP`.
+  networking.useDHCP = lib.mkDefault true;
+  # networking.interfaces.wlan0.useDHCP = lib.mkDefault true;
+
+  nixpkgs.hostPlatform = lib.mkDefault "aarch64-linux";
+}

hosts/mac-laptop/home.nix

@@ -0,0 +1,126 @@
+{ config, pkgs, inputs, ... }:
+
+{
+  # Home Manager needs a bit of information about you and the
+  # paths it should manage.
+  home.username = "joshuaelm";
+  home.homeDirectory = "/home/joshuaelm";
+
+  imports = [ ../../modules/nvim ../../modules/stylix.nix ../../modules/hypr/hyprland_laptop.nix  ];
+
+
+  home.packages = [
+    pkgs.element-desktop
+    pkgs.waybar
+    pkgs.signal-desktop-bin
+    pkgs.supersonic
+    pkgs.adw-gtk3
+    ];
+
+  programs.hyprlock.enable = false;
+  programs.kitty.enable = true;
+  programs.cava.enable = true;
+  programs.btop.enable = true;
+  programs.rofi.enable = true;
+  programs.rofi.package = pkgs.rofi-wayland;
+  services.hyprpaper.enable = true;
+  wayland.windowManager.hyprland.enable = true;
+
+  #xdg.configFile.hypr.source = ./modules/hypr;
+  #xdg.configFile.waybar.source = ./modules/waybar;
+  #xdg.configFile.cava.source = ./modules/cava;
+  #xdg.configFile.kitty.source = ./modules/kitty;
+  #xdg.configFile.rofi.source = ./modules/rofi;
+  #xdg.configFile.dunst.source = ./modules/dunst;
+  #home.file.".cache/ags/hyprpanel/options.json".source = ./modules/hyprpanel/options.json;
+
+
+  home.file.".icons/default".source = "${pkgs.bibata-cursors}/share/icons/Bibata-Modern-Classic";
+
+  services.mpd-mpris.enable = true;
+
+
+  programs.rofi.extraConfig = {
+    show-icons = true;
+    drun-display-format = "{icon} {name}";
+    hide-scrollbar = true;
+    sidebar-mode = true;
+    dpi = 110;
+    font = "FreeSans Regular 12";
+    icon-theme = "Gruvbox-Plus-Dark";
+  };
+  programs.rofi.theme = {
+    window.height = 600;
+    window.width = 600;
+    window.border-radius = 10;
+
+    element = {
+      padding = 5;
+      border-radius = 10; 
+    };
+    inputbar.padding = 14;
+    listview = {
+      padding = 8;
+      border-radius = "0 0 10 10";
+      border = "2 2 2 2";
+      dynamic = false;
+    };
+    "element-text element-icon" = {
+      size = 40;
+      margin = "0 10 0 0";
+    };
+    mainbox.children = "inputbar, message, listview";
+    mainbox.spacing = 0;
+  };
+
+  programs.kitty.extraConfig = ''
+    font_family Fira Code Nerd Font
+    bold_font auto
+    italic_font auto
+    bold_italic_font auto
+    confirm_os_window_close 0
+    cursor_shape beam
+    cursor_trail 3
+  '';
+
+
+  # This value determines the Home Manager release that your
+  # configuration is compatible with. This helps avoid breakage
+  # when a new Home Manager release introduces backwards
+  # incompatible changes.
+  #
+  # You can update Home Manager without changing this value. See
+  # the Home Manager release notes for a list of state version
+  # changes in each release.
+  home.stateVersion = "23.11";
+  xdg.dataFile = {
+    "Steam/compatibilitytools.d/SteamTinkerLaunch/compatibilitytool.vdf".text = ''
+      "compatibilitytools"
+      {
+        "compat_tools"
+        {
+          "Proton-stl" // Internal name of this tool
+          {
+            "install_path" "."
+            "display_name" "Steam Tinker Launch"
+                                                                                   
+            "from_oslist"  "windows"
+            "to_oslist"    "linux"
+          }
+        }
+      }
+    '';
+    "Steam/compatibilitytools.d/SteamTinkerLaunch/steamtinkerlaunch".source =
+      config.lib.file.mkOutOfStoreSymlink "${pkgs.steamtinkerlaunch}/bin/steamtinkerlaunch";
+    "Steam/compatibilitytools.d/SteamTinkerLaunch/toolmanifest.vdf".text = ''
+      "manifest"
+      {
+        "commandline" "/steamtinkerlaunch run"
+        "commandline_waitforexitandrun" "/steamtinkerlaunch waitforexitandrun"
+      }
+    '';
+  };
+
+  # Let Home Manager install and manage itself.
+  programs.home-manager.enable = true;
+}